Posts filed under ‘Compatible Applications’

Vista SP1 and ReadyBoost

The new event entry for Readyboost shows a whopping 82% cache hit percentage!

Continue Reading Saturday 22nd December, 2007 at 3:31 pm Leave a comment

ReadyBoost on Vista

Recently I purchased an ultrafast Transcend 4 GB CF card from a MediaWorld for the lowly cost of 30 Euros (20 GBP / 45 USD) for use as a ReadyBoost drive with Vista – a replacement for my 2GB USB Drive – intended to give Vista a little xmas loving.

After plugging in the drive to the built-in USB multicard reader Vista refused to accept that the drive would support ReadyBoost.  A problem I’ve experienced before with a 2GB SD card which initially ReadyBoost accepted as a cache drive – then later (after removal and testing in a digital camera) decided the drive didn’t come up to scratch.  But this was a fast external memory drive for use with high-speed cameras – so I knew the drive was good. 

I had a little time to kill this time – so decided to dig a little deeper into the problem.

 Vista doesn’t give you any tools to determine what the performance characteristics of drives – apart from a meager Event Log message

"The device will not be used for a ReadyBoost cache because it does not exhibit uniform performance across the device.  
Size of fast region: 80 MB."

Not too helpful….

Now the drive that worked with ReadyBoost previously wasn’t being accepted any more.  Assuming the drive wasn’t damaged in any way – something must have changed for Vista to think that the drive wasn’t good enough.

Digging a little deeper I decided to change the policy for the hardware interface attached to the card – changing it from “Optimize for quick removal” to “Optimize for performance”.  You can find these properties by Opening Explorer -> Right clicking on the drive you want to optimise -> Properties -> Hardware.  You’ll need to select and double click the actual hardware drive (use the drive type to guide you – ie CF, SD, xD, etc) to open the properties of the device.  First you’ll need to click on the UAC enabled Change settings button on the General tab to elevate into Admin, then select the Policies tab (depicted).

SD Card Property Page

Now generally you should only do this for Hard Drives if your machine is connected to a UPS – otherwise you’ll run the risk of data corruption – but ReadyBoost includes a number of features that protect against cache corruption.  Enabling “Optimize for Performance” should be pretty safe – in a worst case scenario – the cache will fail and Vista will fall back to the standard HD.

You’ll need to reboot after making the change to the device properties.  After rebooting the ReadyBoost property page for the drive greeted me with the option of enabling ReadyBoost on the device.

Now some external memory manufacturers do use slower components in the assembly of their cards – so it might not work for you – but it’s worth a shot if you want to improve the performance of your machine and you happen across a flashdrive in the sales.

You can find a good introduction into how to setup your system for use with ReadyBoost at Tom Archer’s old msdn blog here – unfortunately the images are no longer available.  His new blog can be found here.

From what I’ve read SP1 for Windows Vista includes many fixes and enhancements to the ReadyBoost feature on Vista.  I’ve not managed to get it installed here yet – there’s a few problems with it’s x64 support…

Friday 21st December, 2007 at 9:15 am 3 comments

MS Enterprise Enterprise Library 2.0

The Enterprise Library for .NET 2.0 installs ok although building the Enterprise Library will fail as it won’t have permission to the target directory unless you are logged in as an Administrator.

To get around this (you’ll need to have set or know the Administrators password) and….

Continue Reading Sunday 5th March, 2006 at 1:16 pm Leave a comment

Office 2003

Office 2003 installs ok without any problems.

The Office update site however doesn’t check and install updates – even with office.microsoft.com in the Trusted Sites.  I believe it’s a problem with an unsigned cab file that’s downloaded that checks the installed product and any applied updates against what’s available.

Manually downloading updates from the Office Catalog site – works although it’s a long winded process.

Sunday 5th March, 2006 at 12:52 pm Leave a comment

Logitech SetPoint x64

The Logitech SetPoint software (2.47.864) for x64 installs only when you set Compatibility to Windows 2003 SP1 and run tthe setup as Administrator.

Apart from that – it runs like a dream.

Continue Reading Sunday 5th March, 2006 at 12:49 pm 1 comment

UltraEdit Studio 2005

Such a cool text based editor and Runs happily with Windows Vista and can be found here

Saturday 4th March, 2006 at 9:05 pm Leave a comment

OO Defrag Version 8 on Vista

O&O defrag Pro Version 8 works happily on Windows Vista 5308 – although I’ve not tried a boot time defrag yet….

 

 

Saturday 4th March, 2006 at 9:01 pm 1 comment


Recent Posts